Do-Not-Scan List
Contents
Before discovering a network, you can create a Do-Not-Scan list to specify the IP addresses, subnets or device types that you do not want to discover in your network. Consequently, the related devices will be ignored during the discovery process.
By default, the following device types are selected in the Do-Not-Scan list.
▪Aruba LWAP
▪IP Phone
▪LWAP
▪Cisco Meraki AP
▪Cisco Meraki Cloud
▪Cisco Meraki Firewall
▪Cisco Meraki Switch
Adding Do-Not-Scan Devices
1.Log into Domain Management page.
2.Select Operations > Discover Settings > Do-Not-Scan from the quick access toolbar.
3.In the Do Not Scan tab, select either way or both to add do-not-scan devices.
1)Click Add. ▪To specify a host, enter the IP address and 32 in the Subnet Mask field. ▪To specify a subnet, enter the subnet address and the bits of the subnet mask, such as 172.24.101.0 and 24. 2)Enter a description according to your need. 3)Click OK. Tip: You can also import a .csv file including the required information from your local folder. Take the following sample for reference: |
In the device type list, select the check boxes of the device types that you don't want the system to discover. |
See also: