Built-in Data View Templates

The system provides the following built-in data view templates for various purposes and scenarios, including routing and switching, security, quality of service, high availability and so on.

Category

Built-in DVT Name

Branch Criteria

Supporting Variables

Drill Down Actions

Cisco ACI

Fabric Health and Faults [Cisco ACI]

- Traditional Device

- Device Type contains Cisco ACI APIC; Cisco ACI Leaf Switch; Cisco ACI Spine Switch

Device Level:

- fault_details1)

- fault_critical

- health_timestamp

- health_change

Device Level:

- View the Cisco APIC Faults Online Guide1)

Fabric Underlay Connections [Cisco ACI]

- Traditional Device

- Device Type contains Cisco ACI APIC; Cisco ACI Leaf Switch; Cisco ACI Spine Switch

Device Level:

- LLDP_Detail

- CDP_Detail

- port_channel_detail

- vpc_detail

Template Level:

- View the Introduction to Cisco ACI

Logic Node View [Cisco ACI]

Branch: BD

- Traditional Device

Device Level:

- tn_name

- bd_mac

- subnets

Template Level:

- View the ACI Policy Model

Branch: Contract

- Contract

Device Level:

- provider_epg

- consumer_epg

- contract_detail

- filters_detail

Branch: EPG

- EPG

Device Level:

- tn_name1

- ap_name

- ep_detail

Branch: L2Out

- L2Out

Device Level:

- BD_extended

- node_intf_table1

Branch: L3Out

- L3Out

Device Level:

- ospf_info

- node_intf_table

High Availability

HSRP Overview

- Traditional Device (IPv4 Interface)

- Config File contains 'standby' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- hsrp_groups1)

- ip_int_brief2)

Interface Level:

- group1

- authentication

- priority

Template Level:

- Compare the Configuration File in two data sources

- Understand and Troubleshoot HSRP Problems in Catalyst Switch Networks

- View the Spanning Tree Overview

Device Level:

- Execute CLI Commands show standby; Ping the device1)

- Execute CLI Commands show ip int brief and show ip int | in line|list; View the ARP Table2)

Quality of Service

Qos Overview

- Traditional Device (IPv4 Interface; Physical Interface)

- Config File contains 'service-policy' and Config File contains 'policy-map' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- service_policy1)

- class_map2)

- mls_qos_intfs

Interface Level:

- direction

Template Level:

- Compare the Configuration File in two data sources

- View Enterprise QoS Design

Device Level:

- Execute CLI Commands show policy-map1)

- Execute CLI Commands show class-map2)

Routing

EIGRP Overview

- Traditional Device (IPv4 Interface)

- Config File contains 'router eigrp' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- eigrp_neighbor_detail1)

- eigrp_intfs (paragraph) 2)

- RouteTable3)

Interface Level:

- peers (int)

- split_horizon (string)

- pending_routes (string)

Template Level:

- Compare the Configuration File in two data sources

- Show log include INPUT [Cisco IOS NXOS ASA]

- View the EIGRP Troubleshoot Guide

Device Level:

- Execute CLI Commands show ip eigrp neighbor detail; Ping the device; View the MAC Table1)

- View the ARP Table; Execute CLI Commands show ip eigrp interface2)

- Execute CLI Commands show ip eigrp topology3)

IP BGP Overview

- Traditional Device

- Config File contains 'router bgp' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- rid

- bgp_neighbors1)

- bgp_filter_detail2)

- bgp_rib_failure3)

Template Level:

- Compare the Configuration File in two data sources

- Show log include INPUT [Cisco IOS NXOS ASA]

- Troubleshoot BGP

- Apply DVT IP BGP Prefix Instance

Device Level:

- Ping the device; Use Traceroute to discover and map a routing path; Execute CLI Commands show ip bgp neighbors, show tcp brief all1)

- Execute CLI Commands show ip bgp neighbors, show access-list, show ip prefix-list, and show route-map2)

- Understand BGP RIB-failure3)

IP BGP Prefix Instance

- Traditional Device

- Config File contains 'router bgp' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- bgp_paths1)

- bgp_filter_detail2)

- RouteTable

Template Level:

- Compare the Configuration File in two data sources

- Troubleshoot BGP

Device Level:

- View the BGP Advertised-route Table1)

- Execute CLI Commands show access-list, show ip prefix-list, and show route-map2)

ISIS Overview

- Traditional Device (IPv4 Interface)

- Config File contains 'router isis' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- clns_neighbors1)

- clns_interfaces2)

- level_lsp_database3)

- isis_protocol_process4)

Interface Level:

- level_1_metric

- level_2_metric

- l1_adj_count

- l2_adj_count

Template Level:

- Compare the Configuration File and Route Table in two data sources

- Show log include INPUT [Cisco IOS NXOS ASA]

Device Level:

- Ping the device; View the ARP Table; Execute CLI Commands show isis neighbor1)

- Execute CLI Commands show clns interface2)

- Execute CLI Commands show isis database3)

- Execute CLI Commands show isis process4)

MPLS L3VPN

- Traditional Device (IPv4 Interface)

- Config File contains 'vpnv4' and Does not contain 'route-reflector-client'; Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- rd (string)

- exp_map (string)

- imp_map (string)

- interface (paragraph)1)

Template Level:

- Troubleshoot the MPLS VPN

Device Level:

- Show log include INPUT [Cisco IOS NXOS ASA]; Show run section INPUT [ Cisco IOS NXOS ASA]; Execute CLI Commands show ip protocols vrf and show ip vrf interface1)

Multicast Overview

- Traditional Device (IPv4 Interface)

- Config File contains 'ip pim' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- pim_neighbors1)

- pim_intf2)

- rp_mapping3)

- igmp_groups4)

Interface Level:

- version

- dr_priority

- dr1

- nbr_count

Template Level:

- Troubleshoot Multicast

- Compare Configuration File in two data sources

- Show log include INPUT [Cisco IOS NXOS ASA]

Device Level:

- Execute CLI Commands show ip pim neighbor; View the Route Table1)

- Execute CLI Commands show ip pim interface2)

- Execute CLI Commands show ip pim rp mapping and show access-list3)

- Execute CLI Commands show ip igmp group4)

OSPF Overview

- Traditional Device (IPv4 Interface)

- Config File contains 'router ospf' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- ospf_nbrs1)

- ospf_intf2)

- ospf_process3)

- RouteTable4)

Interface Level:

- cost

- nbrs_fc

- intf_state

Template Level:

- Compare the Configuration File in two data sources

- Show log include INPUT [Cisco IOS NXOS ASA]

- Troubleshoot OSPF

Device Level:

- Ping the device; Execute CLI Commands show ip ospf neighbor detail1)

- Execute CLI Commands show ip interface brief, show ip ospf interface, and show ip int | in list|line2)

- Execute CLI Commands show ip ospf and show ip ospf database self-originate3)

- Execute CLI Commands show ip route summary and show ip route ospf; Show ip route INPUT [ Cisco IOS NXOS ASA]4)

Security

Access List [Cisco IOS]

- Traditional Device (IPv4 Interface)

- Config File contains 'access-list' and Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- acl_list1)

- acl_detail

- intf_table2)

- ACL Tips

Interface Level:

- in_acl

- mtu

- out_acl

- nat

Template Level:

- Compare the Configuration File in two data sources

- Troubleshoot Cisco ACL

Device Level:

- Execute CLI Commands show access-list1)

- Execute CLI Commands show ip interface2)

Switching

MPLS LDP

- Traditional Device (IPv4 Interface)

- Config File contains 'mpls ip' and 'ldp'; Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- ldp_id (string)

- ldp_authentication (paragraph)

- ldp_nbrs (paragraph)1)

- mpls_ints (table)

Template Level:

- Troubleshoot MPLS LDP

- Compare data in two data sources

Device Level:

- Show log include INPUT [Cisco IOS NXOS ASA]; show run section INPUT [ Cisco IOS NXOS ASA]; Execute CLI Commands show run | i router-id, show tcp brief all, show mpls ldp discovery, and show mpls ldp neighbor1)

Spanning Tree Overview

- Traditional Device

- Config File contains 'switchport' and Config File contains 'spanning' and Device Type contains Cisco IOS Switch

Device Level:

- root_bridge

- spanning_tree_root

- vlan_intfs

- stp_features

Template Level:

- Compare the Configuration File and STP Table in two data sources

- View the Spanning Tree VLAN Instance

Spanning Tree VLAN Instance

- Traditional Device (Physical Interface)

- Config File contains 'switchport' and Config File contains 'spanning' and Device Type contains Cisco IOS Switch

Device Level:

- bridge_address

- bridge_priority

- stp_vlan

Interface Level:

- role

- type

- cost

N/A

VMware

Infrastructure View [vCenter]

Branch: Legacy

- Traditional Device (Physical Interface)

- Device Type contains NSX Controller; NSX Distributed Logical Router; NSX Edge Security Gateway; NSX Manager; VM Host

Device Level:

- ESXi Host Name

- Memory Size

- vCPU Number

- UsedStorage_MB

Interface Level:

- Connected

- Start Connected

N/A

Branch: VDS

- Vmware Distributed Virtual Switch (Port)

Interface Level:

- Port Group

- State

- Connectee

- Vlan

Operation View [NSX-V]

Branch: Branch1

- Traditional Device

- Device Type contains NSX Distributed Logical Router; NSX Edge Security Gateway

Device Level:

- edge_status (string)

- ha_state (string)

- publish_status (string)

- system_status (string)

N/A

Branch: Branch2

- Traditional Device

- Device Type contains NSX Controller

Device Level:

- status (string)

- nodeFailoverReady (bool)

- connectivity_table (table)

Branch: Branch3

- Traditional Device

- Device Type contains NSX Manager

Device Level:

- componentsByGroup_SYSTEM_components

- componentsByGroup_COMMON_components

Operation View [vCenter]

Branch: Branch1

- Traditional Device (Physical Interface)

- Device Type contains NSX Controller; NSX Distributed Logical Router; NSX Edge Security Gateway; NSX Manager; VM Host

Device Level:

- overallStatus (string)

- overallCpuUsage (int)

- hostMemoryUsage (int)

- guestHeartbeatStatus (string)

Interface Level:

- status (string)

- startConnected (bool)

- connected (bool)

N/A

Branch: Branch2

- Traditional Device (Physical Interface)

- Device Type contains vSphere Distributed Switch

Device Level:

- hosts_status_table

Interface Level:

- intf_status (string)

Generic

Infrastructure View

Branch: ACI

- Fabric Node

Device Level:

- Node Id

- Model

- Serial Number

- Version

Template Level:

- Compare the Configuration File in two data sources

- Monitor the overall health of all devices via SNMP

- Learn more about how to use NetBrain

Device Level*:

- Ping the device; Use Traceroute to discover and map a routing path1)

Branch: Legacy

- Traditional Device

- Device Main Type contains Router; L3 Switch; Firewall; WAN Optimizer; LAN Switch; Load Balancer; Call Manager; WAP; WLC

Device Level*:

- Mgmt IP1)

- Model

- Serial Number

- Site

Network Table View

Branch: Legacy

- Traditional Device

- Device Main Type contains Router; L3 Switch; Firewall; WAN Optimizer; LAN Switch; Load Balancer; Call Manager; WLC

Device Level:

- NDPTable1)

- RouteTable12)

- ARPTable13)

- MACTable14)

Template Level:

- Monitor the overall health of all devices via SNMP

- View the training video to see how NetBrain delivers deeper network visibility, faster troubleshooting diagnoses and enhanced collaboration within IT teams

Device Level:

- View the NDP Table; Compare the NDP Table in two data sources1)

- View the Route Table; Compare the Route Table in two data sources2)

- View the ARP Table; Compare the ARP Table in two data sources3)

- View the MAC Table; Compare the MAC Table in two data sources4)

Overall Health Check

Branch: CiscoASA

- Traditional Device (IPv4 Interface)

- Device Type contains Cisco ASA Firewall

Device Level*:

- one_min_cpu_usage1)

- used_mem_utl2)

- failover_unit3)

- failover_interfaces4)

Interface Level:

- input_errors (int)

- crc (int)

- output_error (int)

- collections (int)

- one_min_input_rate_pkts

- one_min_output_rate_pkts

- one_min_drop_rate_pkts

Template Level:

- Show log include INPUT [Cisco IOS NXOS ASA]

- Show run section INPUT [ Cisco IOS NXOS ASA]

Device Level*:

- Execute CLI Commands show cpu usage1)

- Execute CLI Commands show memory2)

- Show log include INPUT [Cisco IOS NXOS ASA]3)

- Ping the device; Execute CLI Commands show failover4)

Branch: CiscoIOS

- Traditional Device (IPv4 Interface; Physical Interface)

- Device Type contains Cisco IOS Switch; Cisco Router

Device Level:

- intfs_table

- five_min_cpu_usage

- mem_util

- cpu_table

Interface Level:

- input_errors (double)

- crc (int)

- output_error (double)

- collisions (int)

- mtu (int)

- duplex (string)

- tx_load (int)

- rx_load (int)