Before discovering a network, you can create a Do-Not-Scan list to specify the IP addresses, subnets, or device types that you do not want to discover in your network. Consequently, the related devices is ignored during the discovery process.

By default, the following device types are selected in the Do-Not-Scan list.

IP Phone


Cisco Meraki AP

Cisco Meraki Cloud

Cisco Meraki Firewall

Cisco Meraki Switch

Adding Do-Not-Scan Devices

1.Log in to the Domain Management page.

2.Select Operations > Discover Settings > Do-Not-Scan from the quick access toolbar.

3.In the Do Not Scan tab, select either way or both to add do-not-scan devices.

Specifying IP or Subnet Address
Specifying Device Type


See also:

Discovering Network Devices

Tuning Live Access